Signage Journal

Custom Round Blade Sign for Prime Athletica in Ivanhoe

Prime Athletica came to us for signage for their gym in Ivanhoe.

One part of the job was a round, double-sided blade sign. It sticks out from the brick wall on a bracket, with a face on each side, so it can be read from both directions along the street.

How we made the round blade sign

Every part of this sign was custom made in our Heidelberg West based workshop. Here is how it came together, step by step.

1. The frame. The two faces are 3 mm aluminium discs. The arm is 40 mm aluminium square tube with a welded base plate, drilled for the wall fixings. Short pieces of the same tube are the spacers between the two faces. We welded the arm and the spacers to one disc, then put the second disc on the spacers.

2. The rolled edge. We cut a strip of aluminium, bent it and ran it through a roller to make a ring. The ring covers the edge between the two faces, so the sign reads as one solid piece.

3. Sand, etch, prime and paint. With the sign put together, we applied filler and sanded it smooth. Then we etched the aluminium, so the paint grips the metal. After that came the primer, the undercoat and two top coats.

4. The printed faces. The artwork is digitally printed on polymeric vinyl and laminated. We used print and cut to cut each face as a clean circle, then applied one face to each side of the sign.

5. The install. On site, we found the right position on the brick wall and installed the sign. See our installation service.

Round blade sign frame in our workshop: aluminium disc, welded square tube arm and spacers

The frame: aluminium disc, square tube arm and spacers, welded

Rolled aluminium edge ring for the Prime Athletica round blade sign, ready to fit

The rolled aluminium edge, ready to go on

Round blade sign primed in our workshop, ready for the undercoat and two top coats

Primed and ready for the undercoat and two top coats

Painted round blade sign next to the printed Prime Athletica vinyl faces, cut to a circle

The painted sign next to the printed faces, cut to a circle

Finished logo side of the Prime Athletica round blade sign in our workshop

The finished logo side in our workshop

Prime Athletica round double-sided blade sign on a bracket on the brick wall, Ivanhoe

The finished round blade sign on the brick wall, Ivanhoe

Tip: use both faces of a blade sign

Blade signs are the hanging signs you see on Melbourne shopfronts, sticking out from the wall. Most blade signs are double-sided. People see one face or the other, depending on which way they come along the street.

Prime Athletica used one face for the name and the other for the “!” logo, with the web address on both. Whichever way people come, they see the brand and know where to find it online.

Thinking about a blade sign for your gym or shop, or other custom signs in Melbourne? Send us a photo of the wall and we’ll tell you what works.

At Sign and Fitouts, our Heidelberg West based workshop is equipped to meet a wide range of Signage needs. Contact us today for a free quote.

Prime Athletica round double-sided blade sign on a bracket on the brick wall, Ivanhoe

Related Articles

Prime Athletica gym in Ivanhoe with window graphics on the first-floor windows and 3D letters on the brick wall

Commercial Signage Package for Prime Athletica Gym in Ivanhoe

Raised white script lettering on a black shopfront fascia, with gold logo on the window below

How to install heavy 3D sign on a shop front

Bedshed 3D letters above a roller door on a purple factory building in Preston

3D Sign for a Busy Showroom

Black 3D stand-off letters for A/J by Angela Jewellery on a building wall, South Yarra

3D Metal Signs for a Thriving Jewellery Shop

Lili's Early Learning 3D lettering and flower logo on a white building in Hoppers Crossing

Removable 3D Sign and Cost Effective Solution

Clark Rubber shopfront sign above a yellow-clad entrance with a worker on a scissor lift in Preston

Save Money and Time With the Right Signage Solution

Ask our

Signage Experts

About your next signage project

With graphic designers in house, fully equipped signage manufacturing tools and more than 25 years experience

The most popular

Yarra Medical and Cosmetic Centre printed window graphics on a grey building front in South Yarra

Window graphics transform plain glass into eye-catching brand displays for any business.

Clark Rubber shopfront sign above a yellow-clad entrance with a worker on a scissor lift in Preston

A shop sign helps your business stand out, attract customers, and boost sales.

White Wynns Locksmiths four-wheel drive with red and black vehicle graphics

Car and truck graphics turn your vehicles into moving billboards for your business.

White Plantsmith light box sign projecting from a brick shopfront in Preston

Lightbox signage is a great way to increase the visibility of your business in an easy-to-maintain and cost-effective way.

UniLodge lettering and large number 39 on a building entrance canopy in Hawthorn

3D lettering signage adds depth and character to your brand with a professional finish.

Illuminated Accumed and Rossmax signs on a white brick wall above display counters in Greensborough

Illuminated 3D signs keep your brand visible day and night for maximum impact.

How can we help?

White Plantsmith light box sign projecting from a brick shopfront in Preston

Signage Solution

High-quality signs that boost your brand and draw attention.

Raised red Rubber lettering on a yellow and blue sign panel in a workshop

CNC Routing

Precision cutting, grooving, and shaping for high-quality signage.

Creative Design

Creative Design

Visually striking designs that communicate your brand clearly.

Black gloss panel sign with a coffee cup and breakfast, lunch, take away lettering

Fabricating

Durable, precise signs crafted with advanced techniques.